[ Contents ] [ Home ]

References

Ammerman, H.L. & Essex, D.W. (1977). Performance content for job training. (Vol. 4). Deriving performance requirements for training. Research and Development Series No. 124. Columbus, Ohio: Ohio State University, Center for Vocational Education. (ERIC Document Reproduction Service No. ED 146 372).

Anderson, A.M. (1985). Knowledge transmission in Australian agricultural extension: Processes and implications. Unpublished Ph.D. Thesis, Macquarie University, Australia.

Anderson, R., Barnet, S., Pearson, M. & Soo, V. (1982). Task force on procedures and practices in curriculum development. A discussion paper for curriculum services division and educational resources branch. NSW Department of TAFE. (mimeo).

Anderson, T. & Jones, N. (1986). TAFE curriculum research: A review of group process methods. Adelaide: TAFE National Centre for Research and Development.

Anderson, T. & Jones, N. (1986). The facilitation of curriculum: Research workshops in TAFE. Adelaide: TAFE National Centre for Research and Development.

Ansell, A. (1984). Individualized instruction in TAFE: An interim report on the national survey. TAFE Curriculum Research and Development, Western Australia. (mimeo).

Ashurst, R.G. (1986). Fleximode: An evaluation of fleximode in the Victorian TAFE Off-Campus Network in 1985. Melbourne: RMIT.

Atkinson, R. (1990). Roles of educational institutions in open learning for business and industry. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (43-51). Perth: Australian Society for Educational Technology WA Chapter.

Billig, M. (1976). Social psychology and intergroup relations. London: Academic Press.

Blachford, K. (1986). Orientations to curriculum in TAFE. Melbourne: Hawthorn Institute of Education.

Bloom, B. (1968). Learning for mastery. Evaluation Comment, 1(2).

Bone, J. & Guthrie, H. (1990). Approaches to curriculum development: A discussion paper. Adelaide: TAFE National Centre for Research and Development.

Broderick, J.S. (1981). An investigation into the curriculum development process in TAFE in Australia. A comparative analysis report. South Australian Department of TAFE. (TD 481).

CELC (Commonwealth Education Liaison Committee). (1967). Education and training of technicians [The Huddersfield Conference Report]. London: HMSO.

Clover, J. & Goode, T. (1982). Job analysis position paper. Western Australian Department of TAFE. (mimeo).

Conference of TAFE Directors. (1983). Minutes of meeting, July 1983.

Elebash, C. & Cutchen, B. (1983). Liberal education and business education: Are they mutually exclusive? Journal of Business Education, 58(4), 151-3.

Elliot, P. (1977). Media organizations and occupations: An overview. In J. Curran, M. Gurevitch, & J. Woollacott (Eds.), Mass communication and society (142-73). Edward Arnold for Open University Press.

Ellis, R.J. (1986). Selecting tasks for off-the-job and on-the-job: Education and training categories. New South Wales Department of Technical and Further Education, School Curriculum Services, Unit B. (mimeo).

Ellis, R.J. (1982). The occupational survey - an approach. In Analysing the task - an approach: Task analysis workshop. New South Wales Department of Technical and Further Education. (mimeo).

Field, L. (1990). Skilling Australia: A handbook for trainers and TAFE teachers. Melbourne: Longman Cheshire.

Foks, J. (1990). The politics of open learning. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (28-42). Perth: Australian Society for Educational Technology WA Chapter. http://www.ascilite.org.au/aset-archives/confs/olnt90/foks.html

Foks, J. (1988). Open learning in the State Training System. Melbourne: Victorian State Training Board.

Forgione, P.D. & Kopp, A.L. (1979). Curriculum development needs for vocational education: New and changing occupational areas. Columbus, Ohio: The National Center for Research in Vocational Education, Ohio State University. (ERIC Document Reproduction Service No. ED 174 766).

Furber, D. (1988). Tourism: A case study in cooperation. In C. McBeath (Ed.), Case studies in TAFE curriculum (44-49). Perth: West Australian Social Science Education Consortium. http://www.clare-mcbeath.id.au/clare/case-studies/chap6.html

Gough, N. (1981). Curriculum design in vocational education. New Education, 2/3(1), 83-92.

Groenhout, V. (1990). The challenge for TAFE. In Australian Committee on TAFE Curriculum (Eds.), Getting a hold on restructuring: Award restructuring, national curricula and TAFE teachers. Adelaide: TAFE National Centre for Research and Development.

Gullion, C. (1973). Definitions and model for four design processes in education based on statement of objectives. Master's Thesis, Columbia University, (ERIC Document Reproduction Service No. ED 120 401).

Gunningham, J. & Fletcher, A. (1990). The role of integrated training in promoting open learning in industry. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (165-178). Perth: Australian Society for Educational Technology WA Chapter. http://www.ascilite.org.au/aset-archives/confs/olnt90/gunningham.html

Hall, W.C., Hayton, G., Mageean, P. & Scarfe, J. (1990). National review of TAFE teacher preparation and development - Stages 1A and 1B: Skills and competencies. Adelaide: TAFE National Centre for Research and Development.

Hawke, G. & Sweet, R. (1983). Some issues in access and selection (Occasional Paper 1). Adelaide: TAFE National Centre for Research and Development. (TD 741).

Haworth, D. (1980). The analysis of job needs in curriculum development. Curriculum Services Division, New South Wales Department of TAFE. (TD 486).

Hermann, G.D. (1978). Self pacing and occupational curriculum development. Sydney: Macquarie University.

Hermann, G.D. (1971). Articulation and post-Wiltshire advanced education courses. Australian Journal of Advanced Education, 2(1), 2-7.

Hermann, G.D., Richardson, E. & Woodburne, G.J. (1976). Trade and technician education: Principles and issues. Stanmore, NSW: Cassell, Australia.

Hoffman, L.R. (1979). The group problem solving process: Studies of a valence model. New York: Prager Publications.

Janis, I.L. & Mann, L. (1977). Decision making: A psychological analysis of conflict, choice and commitment. New York: The Free Press.

Jones, N. & Anderson T. (1986). TAFE curriculum research: A review of group process methods. Research design. Adelaide: TAFE National Centre for Research and Development.

Jones, N. & Anderson T. (1986). TAFE curriculum research: A review of group process methods. Summary. Adelaide: TAFE National Centre for Research and Development.

Jones, N., Anderson T., Dawson, D. & Dowling, R. (1986). TAFE curriculum research: A review of group process methods. Descriptive bibliography. Adelaide: TAFE National Centre for Research and Development.

Kangan, M. (Chair). (1974). TAFE in Australia: Report on needs in Technical and Further Education (vol. 1) Canberra: Australian Committee on Technical and Further Education.

Kennedy, K.J. (1985). A Role for the TAFE teacher in curriculum development. Curriculum Perspectives, 5(1), 53-7.

Kennedy, K.J., Patterson, C. & Williamson, J. (1986). Curriculum implementation in TAFE in Western Australia: Two case studies. Adelaide: TAFE National Centre for Research and Development.

Kennedy, K.J., Patterson, C. & Williamson, J. (1984). Curriculum implementation: An annotated bibliography. Adelaide: TAFE National Centre for Research and Development.

Kenworthy, B. & Schilling, R. (1984). The national development of instructional materials Adelaide: TAFE National Centre for Research and Development.

Knowles, M. (1978). The adult learner: A neglected species. (2nd ed.). Houston: Gulf.

Lewis, R. (1988). Open learning - the future. In N. Paine (Ed.), Open learning in transition: An agenda for action (89-104). London: Kogan Page.

Macdonald, C. (1984). Self learning. Adelaide: TAFE National Centre for Research and Development.

Mageean, P. (1985). Selection to pre-employment trades based courses. Adelaide: TAFE National Centre for Research and Development.

Mager, R.F. & Beach, K.M. (1967). Developing vocational instruction. Palo Alto, Calif.: Fearon.

McBeath, C. (1990). Curriculum development for education and training: A personal perspective. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (244-57). Perth: Australian Society for Educational Technology WA Chapter. http://www.ascilite.org.au/aset-archives/confs/olnt90/mcbeath.html

McBeath, C. (1989). TAFE to higher education: Pathway to mid-career upgrading. Australian Educational Researcher. 16(3), 45-52.

McBeath, C. (1988). Developing a national curriculum for distance education. In C. McBeath (Ed.) Case studies in TAFE curriculum (138-43). Perth: West Australian Social Science Education Consortium. http://www.clare-mcbeath.id.au/case-studies/chap5.html

McBeath, C. (1986a). Curriculum decision making in TAFE (1st edn.). Adelaide: TAFE National Centre for Research and Development.

McBeath, C. (1986b). Research in TAFE curriculum decision making. Australian Journal of TAFE Research and Development, 1(2), 135-141.

McBeath, C. (1985). Choosing national resources for different learning modes in TAFE. Adelaide: TAFE National Centre for Research and Development.

McBeath, C. & Atkinson, R. (1990). Introduction: The conference programme. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (1-8). Perth: Australian Society for Educational Technology WA Chapter. http://www.ascilite.org.au/aset-archives/confs/olnt90/a-intro.html

McDonald, T. (1982). Modules, self-paced learning, mastery learning, competency profiling curriculum research and development. TAFE Division, Western Australia. (R7.18).

McKinlay, B. (1976). Characteristics of jobs that are considered common: Review of literature and research. (Information Series No. 102). Ohio: Center for Vocational Education.

Mitchell, J. (1990). The TAFE video-conferencing breakthrough. Adelaide: SA Department of Employment and TAFE.

Mitchell, J. & Mathers, R. (1985). A guide to the main design issues for the development of award courses in the South Australian Department of Technical and Further Education. Curriculum Development Branch, South Australian Department of TAFE. (internal publication).

National Heads of TAFE External Studies Meeting. (1983). Report of proceedings, March 28-29. Melbourne.

New South Wales Department of TAFE. (1984). Report on evaluation of modular trade courses. Curriculum Services Division, Sydney.

Noble, C. (1985). Negotiation strategies in curriculum development. Unicorn, 11(2), 127-34.

O'Donnell, M. (1978). Module design in TAFE courses. New South Wales Department of TAFE. (TD 52).

Oregon State Department of Education. (1977). Guidelines for obtaining and using data in vocational program planning. Portland, Oregon: Office of Career Education, Instructional Support Division. (ERIC Document Reproduction Service No. ED 147 520).

Paine, N. (Ed.). (1988). Open learning in transition: An agenda for action. London: Kogan Page.

Parkinson, K. (1986). A glossary of terms used in TAFE. Adelaide: TAFE National Centre for Research and Development.

Parkinson, K. (1985). The articulation of TAFE middle-level and higher education courses in Australia. Adelaide: TAFE National Centre for Research and Development.

Parkinson, K. & Broderick, J.S. (1988). An evaluation of the implementation of national core curricula in Australia. Adelaide: TAFE National Centre for Research and Development.

Parkinson, K., Mitchell, R. & McBeath, C. (1986). Cross-sectoral transfer from TAFE to higher education. Adelaide: TAFE National Centre for Research and Development.

Pearson, M. (1983). Flexible course design for certificate level courses. Paper presented at HERDSA Conference, Brisbane.

Pearson, M. (1981). A review of individualised instruction and self-paced learning. New South Wales Department of TAFE. (TD 830).

Popham, W.J. (1975). Validated instructional materials as the focus of an effective curriculum development strategy. In J. Schaffarzick & D.H. Hampson (Eds.), Strategies for curriculum development. Berkeley, Calif: McCutchan.

Posner, G.J. & Strike, K.A. (1976). A categorization scheme for principles of sequencing content. Review of Educational Research, 46, 665-90.

Pratt, D. (1980). Curriculum design and development. New York: Harcourt Brace Jovanovich.

Radloff, A. & Samson, J. (1990). Literacy and open learning. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (283-289). Perth: Australian Society for Educational Technology WA Chapter.

Ripley, W.K. & Arredondo, T. (n.d.). A training module: Developing a job entry, individualised curriculum. Florida: Orange County Public Schools. (ERIC Document Reproduction Service No. ED 143 783).

Sandery, C. (1984). Occupational curriculum development: A guide for teachers of trade education. Adelaide: TAFE National Centre for Research and Development.

Schwab, J.J. (1969). The practical: A language for curriculum. School Review, 78(1), 1-23.

Shahid Khan. (1983). Occupational course development. Paper presented at HERDSA Conference, Brisbane.

TAFE (Victoria). (1980). Instructional systems model for vocational education. Seminar notes. Planning Services, Education Department Victoria.

TAFE (Victoria). (1980b). An overview of the instructional systems model. Planning Services, Education Department Victoria.

Tjosvold, D., Falkenbach, K. & Stebbins, C. (1981). Cooperation, competition and individualization in vocational education. Canadian Vocational Journal 16(4), 9-15 and 49.

Toussaint, D. (1990). Fleximode within Western Australia TAFE. Adelaide: TAFE National Centre for Research and Development.

Toussaint, D. (1990). Fleximode in the WA TAFE system. In R. Atkinson & C. McBeath (Eds.), Open learning and new technology: Conference proceedings (305-313). Perth: Australian Society for Educational Technology WA Chapter. http://www.ascilite.org.au/aset-archives/confs/olnt90/toussaint.html

Tyler, R. (1949). Basic principles of curriculum and instruction. Chicago: University of Chicago Press.

Walker, D. F. (1975). Curriculum development in an art project. In W.A. Reid & D.F. Walker (Eds.), Case studies in curriculum change. London: Routledge & Kegan Paul.

Walker, D. F. (1971). A naturalistic model for curriculum development. School Review, 80(1), 51-65.


Curriculum Decision Making in TAFE [ Contents ]
HTML author: Clare McBeath [ c.mcbeath@bigpond.com ]
This URL last corrected 3 June 2009: http://www.clare-mcbeath.id.au/cdmt/references.html
Previous URL 27 Oct 2006 to 4 June 2009:http://www.users.bigpond.net.au/atkinson-mcbeath/clare/cdmt/references.html
Previous URL 19 Aug 2002 to 16 May 2006: http://education.curtin.edu.au/pubs/cdmt/references.htm
Previous URL from 8 Mar 1997 to 19 Aug 2002: http://cleo.murdoch.edu.au/trdev-aus/pubs/cdmt/references.htm
© Clare McBeath, Faculty of Education, Curtin University of Technology